Totem Acoustic TO LINK loudspeaker
Long before there were cables, the message travelled through the air: smoke above the ridge, read from the far side of the valley. No wire, no trench in the ground, and it still arrives. Link is the small box that does the same for the bottom end — it takes the cable out of the subwoofer run.
Plug it into the subwoofer output of any powered speaker or amplifier, press its pairing button and then the one on the sub, and the low end travels at 2.4 GHz instead of along the skirting board — so the subwoofer can stand where it sounds best rather than where the cable reaches. One Link drives two Totem wireless subwoofers, which means a Tribe Solution Sub or a Kin Sub 10 no longer decides where the furniture goes. RCA and LFE in, 9 centimetres wide, nothing to configure.
The signal goes through the air and simply arrives, the way smoke is read from the far side. The skirting board stays empty, and the sub finally stands where you want it instead of where the cable happened to reach.
Price increase expected on 1 October 2026
Specifications
| Design | Wireless Transmitter for subwoofers |
|---|---|
| Transmission | 2.4G |
| Inputs | Stereo RCA, LFE |
| Controls | Pairing button |
| Dimensions | 1.57 x 3.54 x 2.55” / 40mm x 90mm x 65mm |
| Compatible with | Tribe Solution Subwoofer |
Where to listen
Every model is sold and demonstrated through Joenit's authorized dealer network in the Benelux and France. Find your nearest dealer to hear it for yourself.
