Totem Acoustic TO KIN LCR V2 loudspeaker
In every fireside tale there is one voice that carries the story, and that voice has to come from where the story is happening. With a screen, that is not the top of the wall, and it is not the side either.
Take the Kin IW, stretch it to 648 mm and give it two 5-inch passive radiators, and you have the LCR: the speaker that goes beside a screen. The symmetrical driver array images the same whether it hangs vertically as a left or right channel or lies horizontally under the television as a centre, so dialogue stays where the actor is standing instead of drifting up the wall. The passives buy the bass the short IW cannot reach — 60 Hz from a box only 95 mm deep — and 91 dB keeps it in step with the rest of the range. Cutout is 162 x 630 mm. Three of these across a wall, plus a Tribe in-wall sub, is a cinema nobody can see.
So the storyteller stays where he belongs: at the picture, at eye level, and entirely out of sight.
Price increase expected on 1 October 2026
Specifications
| Design | Full back-boxed, high-performance loudspeaker |
|---|---|
| Woofer | Twin 4”/10.16cm MHEX Phenolic Honeycomb Woven Hybrid woofer in die-cast basket |
| Tweeter | 1”/2.54cm Titanium Infused Soft Dome |
| Passive radiators | Dual 5″ Metal Amalgamation Compound |
| Frequency response | 60 Hz – 25 kHz ± 3 dB |
| Impedance | 6 Ohm |
| Sensitivity | 91 dB |
| Recommended power | 30 – 120 W |
| Speaker terminals | 5 way gold plated |
| Cutout | 6.37″ x 24.8″ / 161.8 x 630mm |
| Grille | Magnetic, paintable, virtually bezel-less white metal |
| Dimensions | 7.09″ x 25.51″ x 3.75″ / 180 x 648 x 95.25mm |
| Accessories & options | Pre-construction brackets |
Where to listen
Every model is sold and demonstrated through Joenit's authorized dealer network in the Benelux and France. Find your nearest dealer to hear it for yourself.
